Pull Stations

Commercial Fire Alarm Pull Station Installation and Replacement

A fire alarm pull station gives people a fast, direct way to activate a building’s fire alarm system during an emergency. When pulled, the station sends a signal to the fire alarm control panel, which can activate horns, strobes, monitoring communication, and other connected fire safety equipment. Manual activation is especially important in commercial properties because someone may spot smoke, flames, or another fire hazard before an automatic detector responds.

Goldy Locks Inc installs, replaces, services, monitors, and supports fire alarm pull stations for commercial fire alarm systems throughout Chicagoland. Licensing requirements vary by location within the City of Chicago, Goldy Locks services and monitors existing fire alarm systems but does not install new systems. Need pull stations installed, replaced, or added to your fire alarm system? Talk to Goldy Locks today.

Manual Fire Alarm Activation for Commercial Buildings

Pull stations are part of the manual activation side of a commercial fire alarm system.

Smoke detectors, heat detectors, duct detectors, and sprinkler devices activate automatically when conditions change. A pull station is different. It lets a person start the alarm when they see a threat and need the building alerted right away.

That manual step can matter in real emergencies. If someone sees smoke, flames, or a dangerous condition before an automatic device activates, the pull station gives them a clear way to act.

Where Pull Stations Are Commonly Installed

Fire alarm pull stations are commonly installed near:

The right placement depends on building layout, exit paths, occupancy type, fire alarm system design, and local requirements. Pull stations should be visible, accessible, and connected correctly to the fire alarm control panel.

How Fire Alarm Pull Stations Work

A pull station is simple by design, but it has to work correctly. When the handle is activated, the station changes the alarm circuit and sends an initiating signal to the fire alarm control panel. The panel reads that signal and starts the programmed response.

Fire-Lite Pull Stations We Install

Goldy Locks installs Fire-Lite pull stations for many commercial fire alarm applications. Fire-Lite, a Honeywell brand, offers practical, reliable options for both conventional and addressable fire alarm systems. Product selection depends on the fire alarm control panel, system compatibility, building layout, and code requirements.

Fire-Lite BG-12 Series

The Fire-Lite BG-12 Series is designed for compatible conventional fire alarm systems. These pull stations are durable, easy to identify, and available with multiple mounting options for commercial applications.

Fire-Lite BG-12LX

The Fire-Lite BG-12LX is an addressable dual-action pull station designed for Fire-Lite intelligent fire alarm control panels. Addressable pull stations help the panel identify the exact device that was activated, while dual-action operation can help reduce accidental activations.

Dual-Action Pull Stations

A dual action pull station requires two steps, such as lifting a cover or pushing in before pulling down. These are often used where reducing accidental activation is a concern.

Single-Action Pull Stations

A single action pull station usually activates with one motion, such as pulling down the handle. These are straightforward and easy to use.

Single-Action vs. Dual-Action Pull Stations

Not all pull stations activate the same way. The right option depends on the property, fire alarm system design, traffic flow, and local requirements.

What Professional Pull Station Installation Includes

Pull station installation is not just putting a red box on the wall. Proper installation includes placement review, mounting height, compatible wiring, fire alarm panel connection, device addressing when needed, labeling, testing, documentation, and inspection preparation. The station also needs to be visible and accessible for the people who may need to use it. Goldy Locks can help with:

Common Questions About Fire Alarm Pull Stations

Are fire alarm pull stations required in every commercial building?

Not always. Requirements depend on occupancy type, building size, use, fire alarm system design, and local authority requirements. Some properties require manual pull stations, while others may have different fire alarm design rules. Goldy Locks can review the building and help determine what applies.

Can pull stations be installed outdoors?

Some pull stations can be installed outdoors when the correct weatherproof model, backbox, and installation method are used. Outdoor placement depends on the environment, the fire alarm system, and local requirements.

What happens if a pull station is activated by mistake?

The building fire alarm system may go into alarm, and monitoring communication may be sent if the system is monitored. The station usually has to be reset with the proper key or tool, and the system may need to be reset at the fire alarm control panel.

Can old pull stations stay during a fire alarm panel upgrade?

Sometimes. Existing pull stations may be reused if they are compatible, properly located, functional, and acceptable for the new system design. Goldy Locks can inspect the existing devices and determine what can stay and what should be replaced.

Do pull stations need regular testing?

Yes. Pull stations should be tested as part of the building’s fire alarm inspection and maintenance schedule. Testing confirms the station activates properly, reports to the panel, and resets correctly.

What is the difference between a single-action and dual-action pull station?

A single action pull station usually activates with one motion. A dual action pull station requires two steps, such as pushing in or lifting before pulling down. The right choice depends on the building, traffic flow, system design, and local requirements.

Experienced Pull Stations Services

If you need a trusted commercial pull station installation or service in Chicagoland, look no further than Goldy Locks!